ClustrixDB allows clusters to be deployed across multiple zones to provide fault tolerance during unplanned zone failure. A zone in ClustrixDB is grouping of nodes, such as AWS Availability Zones within the same Region, different server racks, different network switches, different power sources, or even separate servers in different data centers. ClustrixDB requires that network latency between zones not exceed 2ms.
When ClustrixDB is configured for zones, the Rebalancer becomes zone-aware and ensures replicas are placed in different zones. Additionally, Paxos accepters are distributed across multiple zones. The result is that ClustrixDB is fault tolerant in the face of unexpected zone failure, regardless of how many nodes are in the zone.
Use of zones with ClustrixDB has the following prerequisites:
The following examples illustrate how zones work with the default MAX_FAILURES = 1.
There must be the same number of nodes in each zone. Clustrix recommends deploying a 9 node cluster across 3 zones.
This cluster can tolerate one node failure:
Or one zone failure:
There must be the same number of nodes in each zone. The following configuration is not supported.
If you require a larger cluster, simply add the same number of nodes to each zone.
See MAX_FAILURES for additional information.
To configure zones, use ALTER CLUSTER ZONE to assign nodes to a zone. Zone ids must be greater than 0 and there must be an equal number of nodes in each zone. For example, a 9 node cluster deployed across 3 zones should have 3 nodes each in zones 1, 2, and 3.
Clustrix recommends provisioning enough free disk space to reprotect the data after a zone failure. See Allocating Disk Space for Fault Tolerance and Availability.
Clustrix currently supports a maximum of 3 zones.
To create a new cluster, follow these steps:
If you would like to migrate your existing cluster, the high-level steps are:
Once this procedure is complete, you should have the same number of nodes in each zone and all nodes should have a non-zero zone assigned. Because the flex up and flex down operations can be time consuming, it is often simpler to migrate to a new cluster when moving from default to zone configurations.
For further information, see Understanding Fault Tolerance in ClustrixDB.