Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

ClustrixDB monitors the amount of space available within your cluster and proactively warns of potential capacity issues. The thresholds for determining a cluster’s capacity are configurable and described below.

See Also: Allocating Disk Space for Fault Tolerance and Availability or In-Memory Tables for guidance in allocating memory and configuring alerts.

Types of Storage

To understand how to manage the Device and Database Utilization, one must first understand how ClustrixDB allocates disk space. ClustrixDB creates and allocates space in three different files:

Permanent Storage (device1)

Permanent storage is used for all database data, undo logs, temporary tables, Binlogs, and ClustrixDB system usage. Such data resides in the device1 file. For new installations, the initial allocation size of device1 is configurable when ClustrixDB is installed. It can be extended after installation using ALTER CLUSTER RESIZE DEVICES. The size of device1 file on disk cannot easily be decreased.

ClustrixDB expects the device1 file to be the same size on every node. On database startup, ClustrixDB will automatically attempt to resize the device1 file on each node to match the largest device1 file present in the cluster, providing the global device_auto_resize_to_largest is set to true (default on new installations).

Temporary Storage (device1-temp)

Temporary storage is used for sorting and grouping of large query results. When required, temporary information is stored in the device1-temp file. By default, this is set to 5GB (per node), but it is configurable with the global variable device_temporary_space_limit_bytes. Increasing this value will take effect immediately, while decreasing it will only take effect at database start. ClustrixDB will attempt to make the device1-temp file the same size on every node.

Write Ahead Log (device1-redo)

The write-ahead log (WAL) is stored in the device1-redo file. This size of this file is 1GB and is not configurable.

Checking Storage Utilization

See how much space is in use by using The CLX Command-Line Administration Tool
shell> /opt/clustrix/bin/clx space

Here is some sample output of that command:

   nid |   Hostname   | Status  |       Undo      |       Perm      |       WAL        |    Temp    |       Used      | DB Total | FS Free
    16 |  eukanuba003 |    OK   |  321.8M (0.04%) |  674.7G (79.4%) |  1024.0M (0.12%) |  0 (0.00%) |  760.1G (89.4%) |   850.0G |  113.9G
    17 |  karma183    |    OK   |  313.5M (0.04%) |  664.6G (78.2%) |  1024.0M (0.12%) |  0 (0.00%) |  750.1G (88.2%) |   850.0G |  113.9G
    18 |  eukanuba002 |    OK   |  324.3M (0.04%) |  669.5G (78.8%) |  1024.0M (0.12%) |  0 (0.00%) |  755.0G (88.8%) |   850.0G |  113.9G
    19 |  eukanuba001 |    OK   |  339.7M (0.04%) |  671.0G (78.9%) |  1024.0M (0.12%) |  0 (0.00%) |  756.4G (89.0%) |   850.0G |  113.9G
    20 |  eukanuba005 |    OK   |  277.3M (0.03%) |  668.7G (78.7%) |  1024.0M (0.12%) |  0 (0.00%) |  754.1G (88.7%) |   850.0G |  113.9G
    21 |  eukanuba004 |    OK   |  420.3M (0.05%) |  678.6G (79.8%) |  1024.0M (0.12%) |  0 (0.00%) |  764.1G (89.9%) |   850.0G |  113.9G
    22 |  eukanuba006 |    OK   |  397.0M (0.05%) |  670.4G (78.9%) |  1024.0M (0.12%) |  0 (0.00%) |  755.9G (88.9%) |   850.0G |  113.9G
    23 |  karma184    |    OK   |  479.9M (0.06%) |  674.8G (79.4%) |  1024.0M (0.12%) |  0 (0.00%) |  760.3G (89.5%) |   850.0G |  113.9G
                                     2.8G (0.04%) |    5.2T (79.0%) |     8.0G (0.12%) |  0 (0.00%) |    5.9T (89.1%) |     6.6T |  910.9G

Global Variables

For most workloads, the default settings for all globals shown below are optimal. These variables are only available at the global level.

Device Configuration Variables

These variables control the uniformity of device1 size throughout the cluster and the size of the device1-temp space, respectively.



Automatically resize all (online) devices in the cluster to match the largest device



Maximum amount of bytes allowed to be used for temporary containers.


To expand the size of device1 files throughout your cluster, see ALTER CLUSTER RESIZE DEVICES and to reduce the size of the device1 file cluster-wide, see Decreasing device1 Size.

Database Thresholds

Global variables establish the Device and Database Utilization thresholds for a cluster. Alerts are issued when those thresholds are exceeded. If additional disk space is not made available, warnings can turn into errors, and queries will eventually begin to fail. To prevent that, you must make more space available in the cluster. (See Issue Resolution below for guidelines.)   


These variables control when the user is warned of pending device1 utilization issues so that they may take action(s) to prevent the database from becoming completely full. Some threshold settings apply to user queries while others apply to system queries. (User queries are transactions which originate with an end user whereas system queries are internal ClustrixDB processes such the Rebalancer, binlog deletes, statd, etc.)

VariableDescriptionDefault ValueAllowed Values


Database guard rail message interval in seconds.


Minimum: 10

Maximum: 600


Warn about user queries when space usage surpasses this percentage.


Minimum: 50

Maximum: databasefull_user_error_percentage - 1


Fail user queries when space usage surpasses this percentage.


Minimum: databasefull_user_warn_percentage + 1

Maximum: databasefull_system_warn_percentage - 1


Warn about system queries when space usage surpasses this percentage.


Minimum: databasefull_user_error_percentage + 1

Maximum: databasefull_system_error_percentage - 1


Fail user queries when space usage surpasses this percentage.


Minimum: databasefull_system_warn_percentage + 1

Maximum: >99


Alert Messages

The following alerts are triggered when the corresponding global variable is exceeded. This is evaluated each time ClustrixDB allocates space and any alerts necessary are sent every databasefull_message_interval_s seconds. If multiple alerts are detected, only the most critical will appear. To learn more about ClustrixDB's Alerter, see Database Alerts .

Global Variable EvaluatedAlert TriggeredLevelDescriptionMessage Shown




Database space low

Database space is nn% used. Soon user queries will fail.




Database space extreme

Database space is nn% used. User queries will now fail.




Database space critical

Database space is nn% used. User queries will fail, and soon system queries will fail.




Database space exhausted

Database space is nn% used. User queries and system queries will now fail.

Issue Resolution

When you receive any of the alerts above, some action will be necessary to prevent the capacity of device1 from reaching the next threshold or worse, full capacity and an inoperable cluster. It is important to begin assessing these resolutions as soon as possible once the first utilization warning is received.

Here are some resolutions to consider:

  • Increase available space on the cluster by:

  • Enlarge the size of the device1 file on all nodes by using ALTER CLUSTER RESIZE DEVICES.

  • Add additional space by Expanding Your Cluster's Capacity - Flex Up.

  • Terminate and reschedule long running transactions such as ALTERs, Backups, and BI Queries, as these will halt garbage collection and cause the undo log to temporarily grow in size.

If you need assistance, please contact Clustrix Support.

View or Modify Global Variables

For instructions to view or modify these global variables, please see Global Variables.

  • No labels